Showing 1 - 10 of 10

Click for more...

Big Rochester 2 Barrel to Small Carb Adapter

The adapter is a two piece riser that is 1" tall aluminum fully machined. This will allow you to use a large Rochester intake carb spacing and run a small 2G Rochester carb. Often you find this setup on old Pontiac's, two large outboard cabs and a small center.

$55.00
AD1

Click for more...

Tri Power Small Rochester Intake adapter to Big 2G Carb

The adapter is a two piece riser that is 1" tall aluminum fully machined. This will allow you to use a small Rochester intake carb spacing and run a large 2G Rochester carb.

$55.00
AD2

Click for more...

Tri Power Small 2G or WW to Stromberg 97 94 Adapter

The adapter is a two piece riser that is 1" tall aluminum fully machined. This will allow you to use a small 2G Rochester four bolt intake carb spacing or Stromberg WW four bolt spacing and run a Stromberg 97 or Holley 94 carb. Comes with free gaskets.

$39.95
AD3

Click for more...

Tri Power Adapter 3 bolt intake Stromberg 97 Holley 94 to 4 bolt Rochester 2G

The adapter is a two piece riser that is 1" tall aluminum fully machined. This will allow you to use a 3 bolt intake and bolt on a small Rochester 2G carburetor or Stromberg WW without modifying your intake. The 4 bolt pattern is 1-7/8" x 3-1/4" on center.

$39.95
AD3.5

Click for more...

2300 Base Carburetor 4412 Carb Adapter to 4 Barrel AFB or Holley Intake Manifold

The adapter is 1/2" tall aluminum and fully machined. This will allow you to use a 4 barrel intake manifold and bolt on a Holley 2300 base carburetor without modifying your intake.

$49.95
AD4

Click for more...

Big Rochester 2GC Carburetor Adapter to 4 Barrel AFB or Holley Intake Manifold

The adapter is 1/2" tall aluminum and fully machined. This will allow you to use a 4 barrel intake manifold and bolt on a big Rochester 2GC carburetor without modifying your intake. The 4 bolt pattern is 2" x 3-11/16" on center.

$49.95
AD5

Click for more...

Small Rochester 2G Carburetor Adapter to 4 Barrel AFB or Holley Intake Manifold

The adapter is 1/2" tall aluminum and fully machined. This will allow you to use a 4 barrel intake manifold and bolt on a small Rochester 2G carburetor or Stromberg WW and others without modifying your intake. The 4 bolt pattern is 1-7/8" x 3-1/4" on center.

$49.95
AD6

Click for more...

Carburetor Holley 4412 Adapter to Tunnel Ram Intake Manifold Turned 90 Degrees

The adapter is 1/2" tall aluminum and fully machined. This will allow you to use a 4 barrel tunnel ram intake manifold and bolt on a Holley 4412 / 2300 base carburetor and turn it sideways without modifying your intake.

$49.95
AD7

Click for more...

Pontiac Tri Power Intake Adapter Large Rochester 2GC Carburetor to Holley 4412

This is for one adapter that is 1/2" tall 6061 aluminum and fully machined. This will allow you to use a large Rochester 2GC two barrel intake manifold and bolt on a 2300 or 4412 Holley two barrel carburetor without modifying your intake. It can be used on a GM single two barrel intake or on a large base Pontiac Tri Power intake manifold. The price is for one adapter but you can buy as many as you need. Includes one adapter and two free gaskets and four mounting bolts

$40.00
AD8

Click for more...

Holley 4412 0-4144-1 & 0-4365-1 Carburetor To Rochester 2G Small Stromberg WW Carter Intake Adapter

This is for one adapter that is 1/2" tall 6061 aluminum and fully machined. This will allow you to use a small Rochester 2G, Carter, or Stromberg WW two barrel intake manifold and bolt on a 2300 or 4412 and 0-4144-1 & 0-4365-1 Holley two barrel carburetor without modifying your intake. It can be used on a GM, Mopar, Pontiac, and other two barrel intakes or on a small base Pontiac Tri Power intake with a small center carb manifold with a bolt spacing of 1-7/8" x 3-1/4" on center. If you need a large adapter for the Pontiac outboard carbs we have that available as well in our store. The price is for one adapter but you can buy as many as you need.

$40.00
AD9
Showing 1 - 10 of 10